Skip to main content

An EU authorised representative is a person or company established in the EU that a non-EU manufacturer appoints by written mandate to carry out specified tasks on its behalf. For machinery, the choice of EU authorised representative affects access to the technical file, the declaration of conformity and contact with market surveillance authorities.

Manufacturers outside the European Union often ask two related questions: do we need an authorised representative, and what actually happens if a market surveillance authority checks our product? This article answers both for machinery, outdoor equipment and electrical products subject to EMC requirements.

What Is an EU Authorised Representative?

An authorised representative is a natural or legal person established in the EU who holds a written mandate from the manufacturer to carry out specified tasks on the manufacturer’s behalf. The representative is not the importer or distributor by default, although the same company may hold more than one role. Responsibility for design, risk assessment and conformity of the product remains with the manufacturer and cannot be delegated.

When Do You Need One?

Under the Machinery Directive 2006/42/EC, appointing an authorised representative is optional. Two other rules, however, mean that a non-EU manufacturer almost always needs a contact point in the EU:

  • Technical file contact: The EC declaration of conformity for machinery must name the person established in the EU who is authorised to compile the technical file.
  • Article 4 of Regulation (EU) 2019/1020: Since 16 July 2021, products covered by the legislation listed in that article, which includes the Machinery Directive, the Outdoor Noise Directive 2000/14/EC and the EMC Directive 2014/30/EU, may be placed on the EU market only if an economic operator established in the EU is responsible for certain compliance tasks.

That economic operator can be an EU importer, an authorised representative with a written mandate, or, where neither exists, a fulfilment service provider established in the EU. If you sell directly to end users in the EU without an importer, appointing an authorised representative is the usual way to meet this requirement.

What Does the EU Economic Operator Do?

  • Verifies that the declaration of conformity and the technical documentation have been drawn up.
  • Keeps the declaration of conformity at the disposal of the authorities and ensures the technical documentation can be made available on request.
  • Provides authorities with the information needed to demonstrate conformity, in a language they can understand.
  • Informs authorities when there is reason to believe a product presents a risk.
  • Cooperates with authorities, including on corrective action.

The name and contact details of this operator must appear on the product, its packaging, the parcel or an accompanying document.

What Changes Under the Machinery Regulation?

Regulation (EU) 2023/1230 applies from 20 January 2027. It sets out the obligations of manufacturers, authorised representatives, importers and distributors in separate articles, in line with the standard EU product legislation model. Importers must verify that the manufacturer has carried out the conformity assessment, and must indicate their own name and address on the machinery or its documentation. An importer or distributor that places machinery on the market under its own name, or modifies it in a way that affects compliance, is treated as the manufacturer.

How Market Surveillance Works

Each Member State appoints market surveillance authorities that check products on the market and, together with customs, at the border. A check typically proceeds as follows:

  1. Selection: Products are selected through risk-based programmes, complaints, accident reports or customs controls.
  2. Document check: The authority requests the declaration of conformity, instructions and, where needed, the technical documentation.
  3. Physical inspection or testing: Markings, guards, electrical equipment or declared values such as sound power level may be inspected or tested.
  4. Outcome: If non-compliance is found, the economic operator is required to take corrective action within a set period.

Possible Consequences of Non-Compliance

Non-compliant machines withdrawn from sale by market surveillance
  • Customs may suspend release for free circulation and refuse entry of the product.
  • The authority may require correction of formal non-compliance, such as a missing declaration or incorrect marking.
  • Where a risk is identified, the product may be restricted, withdrawn from the market or recalled from end users.
  • Measures against products presenting a serious risk are notified to other Member States through the EU rapid alert system.
  • Penalties are set by national law and vary between Member States.

Great Britain and Türkiye

Great Britain and Türkiye apply their own equivalents of these rules. For Great Britain, an authorised representative must be established in the UK. Türkiye applies EU product legislation under the Customs Union, with market surveillance carried out by the competent ministries under its product safety law; importers into Türkiye carry obligations comparable to those of EU importers. For import controls on machinery, see our article on exporting machinery to Türkiye.

A Notified Body Is Not an Authorised Representative

Verifying a notified body certificate

A notified body carries out conformity assessment independently and cannot act as the manufacturer’s authorised representative or hold the manufacturer’s compliance responsibilities. TESTPLUS (NB 2908) carries out conformity assessment for machinery, outdoor noise and EMC. For scope, see Machine CE Certificate, Noise Emission (2000/14/EC) and Electromagnetic Compatibility (2014/30/EU).

The tasks of economic operators established in the Union are set out in Article 4 of Regulation (EU) 2019/1020 on market surveillance.

Related reading

US manufacturers of outdoor equipment: see exporting outdoor equipment from the USA to the EU for the 2000/14/EC noise certification steps.