Skip to main content

The CE marking may only be affixed to a product that falls within the scope of at least one EU directive or regulation requiring it. Affixing CE to a product outside these rules is just as unlawful as omitting it from a product that needs it. The first step of every CE project is therefore the same: identify which CE marking directives and regulations apply. This guide lists the current legislation, explains how to determine applicability and gives typical combinations for machinery.

As Notified Body NB 2908, TESTPLUS provides machinery CE certification under the Machinery Directive 2006/42/EC and the Machinery Regulation (EU) 2023/1230.

How to Determine Which Legislation Applies

Determining which CE legislation applies to a product
  1. Describe the product precisely: intended use, energy source, users (professional or consumer), radio functions, pressure, batteries and software connectivity.
  2. Check the scope and exclusions of each act: every directive or regulation has a scope article and an exclusion list. For example, the Low Voltage Directive does not apply separately to machinery, whose electrical hazards are covered by the Machinery Directive.
  3. Combine: most products fall under several acts at the same time. The manufacturer must comply with all of them and list them in a single EU declaration of conformity.
  4. Select the conformity assessment route: for each act, decide whether self-declaration is allowed or a notified body is required.

CE Marking Directives and Regulations (2026)

Product groups subject to different CE legislation
Product area Legislation
Machinery Directive 2006/42/EC, replaced by Regulation (EU) 2023/1230 from 20 January 2027
Outdoor noise of equipment Directive 2000/14/EC
Electromagnetic compatibility Directive 2014/30/EU
Low voltage electrical equipment Directive 2014/35/EU
Radio equipment Directive 2014/53/EU
Hazardous substances (RoHS) Directive 2011/65/EU
Equipment for explosive atmospheres (ATEX) Directive 2014/34/EU
Pressure equipment Directive 2014/68/EU
Simple pressure vessels Directive 2014/29/EU
Lifts and safety components for lifts Directive 2014/33/EU
Measuring instruments Directive 2014/32/EU
Non-automatic weighing instruments Directive 2014/31/EU
Pyrotechnic articles Directive 2013/29/EU
Explosives for civil uses Directive 2014/28/EU
Toys Directive 2009/48/EC (being replaced by a new Toy Safety Regulation)
Recreational craft and personal watercraft Directive 2013/53/EU
Personal protective equipment Regulation (EU) 2016/425
Appliances burning gaseous fuels Regulation (EU) 2016/426
Cableway installations Regulation (EU) 2016/424
Medical devices / in vitro diagnostics Regulations (EU) 2017/745 and 2017/746
Construction products Regulation (EU) No 305/2011 and the new Regulation (EU) 2024/3110
Ecodesign Directive 2009/125/EC implementing measures and Regulation (EU) 2024/1781
Batteries Regulation (EU) 2023/1542
Products with digital elements Cyber Resilience Act, Regulation (EU) 2024/2847 (main obligations from December 2027)
High-risk AI systems Artificial Intelligence Act, Regulation (EU) 2024/1689

Legislation that does not require CE marking

Some well-known EU rules have no CE marking: REACH (Regulation (EC) No 1907/2006), WEEE (Directive 2012/19/EU, which uses the crossed-out wheelie bin symbol) and the General Product Safety Regulation (EU) 2023/988. Marine equipment uses the wheel mark, and transportable pressure equipment uses the π mark.

Typical Combinations for Machinery

Product Usually applicable
Diesel generator set Machinery 2006/42/EC, Outdoor Noise 2000/14/EC, EMC 2014/30/EU
Construction site compressor Machinery 2006/42/EC, Outdoor Noise 2000/14/EC, EMC 2014/30/EU, pressure equipment legislation for the receiver
Woodworking circular saw Machinery 2006/42/EC (Annex IV), EMC 2014/30/EU, RoHS 2011/65/EU
Machine with Wi-Fi or Bluetooth module Machinery 2006/42/EC, Radio Equipment 2014/53/EU (which covers EMC and electrical safety of the radio part), RoHS
Electric bicycle (EPAC) Machinery 2006/42/EC, EMC 2014/30/EU, RoHS, Batteries Regulation. See EPAC CE certification

Frequently Asked Questions

Can I put CE on a product if no directive applies?

No. CE marking is only allowed where EU legislation provides for it. Products outside these acts are covered by the General Product Safety Regulation without CE marking.

Do I need one declaration per directive?

No. The manufacturer draws up a single EU declaration of conformity listing all applicable legislation and standards.

When is a notified body required?

It depends on the act and the product. Examples are Annex IV machinery under 2006/42/EC, equipment subject to Annex VI, VII or VIII procedures under 2000/14/EC, and the EU type-examination under the EMC Directive, which is optional but commonly used when harmonised standards are not fully applied. See the CE certification process.

TESTPLUS Scope

TESTPLUS is EU Notified Body NB 2908. It is one of seven bodies worldwide accredited and notified under all three of the Outdoor Noise Directive 2000/14/EC, the Machinery Directive 2006/42/EC and the EMC Directive 2014/30/EU. For these acts, TESTPLUS carries out conformity assessment and also offers voluntary third-party certification. Contact us with your product details to confirm the applicable legislation and the certification route.

Related reading