Use of Certificates and Marks
This page summarises the conditions under which certificates issued by TESTPLUS, the CE marking, the notified body identification number (2908), the TESTPLUS logo and the TÜRKAK accreditation mark may be used. The rules are intended to ensure that certificate holders communicate their certification status accurately and without misleading anyone.
Scope
The rules cover the certificates issued by TESTPLUS under the conformity assessment procedures of Directives 2006/42/EC, 2000/14/EC and 2014/30/EU, and the logos, marks and markings used together with those certificates. The certificate holder is responsible for complying with these rules.
Use of certificates and marks
- The certificate may be used and reproduced in magazines, books and similar publications and on the internet in order to demonstrate the holder’s competence within the scope of certification.
- No part of the certificate may be used, reproduced or published separately.
- Reports and certificates issued by TESTPLUS may not be translated into another language without the permission of TESTPLUS.
- The certificate may not be used for departments, branches, affiliates or subsidiaries that are not within the scope of certification, and the right of use may not be transferred to third parties.
- Each certificate is recorded in the online inquiry system as soon as it is issued and can be verified by its number and QR code.
CE marking and notified body identification number (2908)
CE marking
- The CE marking is affixed only by the manufacturer or its authorised representative, before the product is placed on the market. By affixing the marking, the manufacturer declares that conformity of the product with the applicable legislation is its own responsibility.
- The design of the marking may not be altered; it may be enlarged or reduced provided the proportions are respected, and it must be at least 5 mm high unless the applicable legislation specifies otherwise.
- The marking is affixed visibly, legibly and indelibly to the product or to its data plate; where this is not possible, to the packaging and to the accompanying documents.
- No other markings likely to mislead third parties as to the meaning or form of the CE marking may be affixed to the product. The CE marking may be used only on products for which the legislation provides for it.
Identification number 2908
- The number may be used together with the CE marking by organisations certified by TESTPLUS under the relevant legislation, where that legislation so requires.
- It may not be used in declarations or labels relating to products outside the scope of certification, or in a way that deceives consumers; the right of use may not be transferred to third parties.
- For modules that complement each other, the notified body number is not used on certificates issued before the complementary process has been completed.
- Any damage arising from incorrect use of the number is the responsibility of the certificate holder.
- The combination of the identification number with the TESTPLUS logo may be used only by TESTPLUS.
Noise marking
The manufacturer may affix the noise marking to a product whose conformity has been approved under 2000/14/EC; the marking is used only for the product whose conformity has been approved, and the manufacturer is obliged to state the declared (guaranteed) value within the marking.
TESTPLUS logo and TÜRKAK accreditation mark
The TESTPLUS certification mark consists of the TESTPLUS logo together with the accreditation symbol and number; it is sent to the certified organisation electronically.
- The mark may be enlarged or reduced, provided its original form is preserved, it remains legible and it is not smaller than 20 mm; it may be used in its original colours or in black and white. The colour and format may not be changed, and the positions of the TESTPLUS mark and the accreditation mark may not be altered.
- It may be used on stationery, advertising and promotional materials relating to activities within the scope of certification; it may not be used on promotional materials and documents relating to activities outside that scope.
- It may be used on the interior walls and doors of the organisation’s premises and on exhibition stands.
- It may not be used on the product or in any way that gives the impression that TESTPLUS assumes responsibility for the product.
- It may not be used on vehicles, buildings, flags or business cards (including e-mail and social media signatures).
- It may not be used on laboratory test, calibration, testing or surveillance reports or on other documents relating to the product.
- The certification mark may not be more prominent than the certified organisation’s own logo.
- Organisations holding more than one certificate shall use the mark in a way that does not cause confusion.
- Business cards may not carry any reference to the organisation’s accreditation.
- The TÜRKAK mark on its own may be used only by TESTPLUS. The mark intended for client use is specially prepared together with the TESTPLUS logo and sent to the client; when used together, the TÜRKAK mark may not be the more dominant one.
Misleading use and sanctions
- When incorrect or misleading use is identified, the client is warned in writing and asked to correct it within no more than 15 days.
- If no correction is made within that period, the certificate is suspended; if the situation continues, the certificate is withdrawn, the withdrawal is made public and, where deemed necessary, reported to the legal authorities.
- In the event of unauthorised or improper use of the CE marking or the identification number, the certificate is suspended and the accreditation body and the relevant Ministry are informed. If the nonconformity continues, the certificate is withdrawn.
- If the breach is repeated, or in the case of a deliberately misleading statement, the certificate is withdrawn directly.
- TESTPLUS reserves the right to take legal action in cases of unauthorised or misleading use.
What to do in the event of suspension or withdrawal
When a certificate expires, is suspended or is withdrawn, the client must immediately remove the TESTPLUS certificate and logos from all promotional materials, products, catalogues, websites and digital media, and stop using the notified body identification number. The suspension period is a maximum of 6 months; if the nonconformity is not resolved within that period, the certificate is withdrawn. Suspension and withdrawal decisions are notified to the client in writing and made public on the TESTPLUS website.
The general principles of CE marking are laid down in Article 30 of Regulation (EC) No 765/2008.
Monitoring of use
TESTPLUS takes the necessary measures to prevent and correct use contrary to the rules and applies the sanction process to clients who act in breach of them. The current status of certificates can be verified by anyone through the online inquiry system.
This page is the public summary of the relevant provisions of PR07 Certificate and Mark Use Procedure Rev.4 (21.10.2025) and R01 Product Certification Rules and General Conditions Rev.4 (01.09.2026). The current full text of the documents governs certification activities and is provided to interested parties on request. The Turkish original prevails in case of any discrepancy.