Skip to main content

The Machinery Regulation (EU) 2023/1230 applies from 20 January 2027, the date on which Machinery Directive 2006/42/EC is repealed. This notice is addressed to manufacturers holding a valid EC Type-Examination Certificate issued by TESTPLUS (Notified Body No. 2908) under Directive 2006/42/EC.

Existing Certificates Remain Valid

Under the transitional provisions, EC type-examination certificates issued under Directive 2006/42/EC remain valid until their expiry date. Machinery placed on the market in conformity with Directive 2006/42/EC before 20 January 2027 may continue to be made available on the market.

What Manufacturers Must Do from 20 January 2027

For products placed on the market for the first time from that date, the following must be updated to meet the requirements of the Regulation:

  • Technical documentation
  • EU Declaration of Conformity
  • Instructions for use (including digital format)
  • Marking and labelling

The Regulation introduces additional essential health and safety requirements: protection against corruption and cybersecurity, software and control systems performing safety functions, and systems with self-evolving behaviour (AI). Updating the technical documentation is the manufacturer’s responsibility.

Certificate Renewal and Revision

  • Expiring certificates will be renewed as EU-type examination (Module B) under the Regulation. The renewal builds on the test reports of the original assessment and focuses on the gaps arising from the new requirements.
  • Certificate holders with design, model or variant changes should contact us about a revision of their certificate.
  • Under the Regulation, TESTPLUS will also apply the unit verification (Module G) procedure.

TESTPLUS Accreditation Status

TESTPLUS’s accreditation and notification under Regulation (EU) 2023/1230 are in progress and are expected to be completed before 20 January 2027. Certificate holders are also being informed by e-mail.

Frequently Asked Questions

Is my EC Type-Examination Certificate still valid after 20 January 2027?

Yes. Under the transitional provisions, your certificate remains valid until its expiry date. However, for products placed on the market after that date, the technical documentation, EU Declaration of Conformity, instructions and labelling must be updated to the Regulation.

Do I need to do anything for machines I have already sold?

No. Machinery placed on the market in conformity with Directive 2006/42/EC before 20 January 2027 is not affected.

My certificate expires in 2027. What should I do?

Renewal will be carried out under Regulation (EU) 2023/1230. We recommend contacting us now to plan it.

Which legislation should my EU Declaration of Conformity refer to?

For products placed on the market on or after 20 January 2027, the EU Declaration of Conformity must refer to Regulation (EU) 2023/1230.

Contact

TESTPLUS – Head Office – Notified Body No. 2908
Abdurrahmangazi Mah. Ebubekir Cad. No:34/15 Sancaktepe, Istanbul, Türkiye
Tel: +90 535 489 86 96 · E-mail: info@testplus.com.tr

Related pages: Machinery CE Certification · New Machinery Regulation (EU) 2023/1230: 20 January 2027 Guide