Skip to main content

On 16 October 2026, the Turkish Ministry of Industry and Technology published the Machinery Safety Regulation (2023/1230/EU) and its 11 annexes in the Official Gazette of the Republic of Türkiye (issue no. 33402). The Regulation transposes the EU Machinery Regulation (EU) 2023/1230 into Turkish law and replaces the Machinery Safety Regulation (2006/42/EC) that has applied in Türkiye since 2009. For manufacturers in the UK, the US and elsewhere who sell machinery into both the EU and Türkiye, the key message is simple: the two markets move to the new rules on the same day, 20 January 2027. This article summarises what the Türkiye Machinery Safety Regulation and its annexes change for manufacturers, importers and distributors.

As Notified Body NB 2908, TESTPLUS provides machinery CE certification under the Machinery Directive 2006/42/EC and the Machinery Regulation (EU) 2023/1230.

Key Dates of the Türkiye Machinery Safety Regulation

Robotic production cell enclosed by a safety fence

The Regulation enters into force in two stages (Article 52):

Date Provisions in force
16 October 2026 (publication) Purpose, scope and legal basis (Articles 1–3); provisions on updating Annex I and Annex II (Articles 7 and 8, paragraphs 2 and 3); Article 21(2) on common specifications; notification of conformity assessment bodies and notified bodies (Articles 27–42); Article 47, Provisional Article 1, Articles 52 and 53
20 January 2027 All other provisions. The Turkish Machinery Safety Regulation (2006/42/EC) is repealed on the same date.

What Is Repealed?

Article 51 repeals the Turkish Machinery Safety Regulation (2006/42/EC), published on 3 March 2009, and the Turkish regulation on the certification and marking of wire ropes, chains and hooks (73/361/EEC), published on 1 July 2003. References to these regulations are read as references to the new Regulation.

Scope

The Regulation covers machinery and the following related products (Article 2): interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, and removable mechanical transmission devices. Partly completed machinery is also covered. The exclusions follow the EU text, including household appliances, audio and video equipment, IT equipment, ordinary office machinery, low-voltage switchgear and electric motors falling under the Turkish equivalents of the Low Voltage Directive (2014/35/EU) or the Radio Equipment Directive (2014/53/EU), and high-voltage switchgear and transformers.

The Annexes at a Glance

Annex Content
I Categories of machinery and related products subject to specific conformity assessment procedures (Parts A and B)
II Indicative list of safety components
III Essential health and safety requirements
IV Technical documentation (Part A: machinery and related products; Part B: partly completed machinery)
V EU declaration of conformity and EU declaration of incorporation
VI–X Conformity assessment modules A, B, C, H and G
XI Assembly instructions for partly completed machinery

Conformity Assessment: Annex I Replaces Annex IV

Product category Procedures (Article 26)
Annex I, Part A Notified body always involved: EU-type examination (Module B) + Module C, full quality assurance (Module H) or unit verification (Module G).
Annex I, Part B Internal production control (Module A) only where harmonised standards or common specifications covering all relevant requirements are fully applied; otherwise Module B + C, H or G.
Not listed in Annex I Internal production control (Module A).

Annex I, Part A

  1. Removable mechanical transmission devices including their guards
  2. Guards for removable mechanical transmission devices
  3. Vehicle servicing lifts
  4. Portable cartridge-operated fixing and other impact machinery
  5. Safety components with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions
  6. Machinery with embedded systems with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions, not placed independently on the market, in respect only of those systems

Annex I, Part B

Part B lists 19 categories, including circular saws, band saws, planing, thicknessing, tenoning and vertical spindle moulding machines and portable chainsaws for woodworking; presses, including press brakes, for cold working of metals; plastics and rubber injection or compression moulding machinery; machinery for underground work; manually loaded household refuse collection trucks with a compression mechanism; devices for lifting persons, or persons and goods, involving a hazard of falling from a vertical height of more than three metres; protective devices designed to detect the presence of persons; power-driven interlocking movable guards; logic units ensuring safety functions; and ROPS and FOPS.

Most machinery listed in Annex IV of the Directive remains in Part B. Vehicle servicing lifts and portable cartridge-operated machinery, however, move to Part A, so internal production control is no longer an option for them. For more detail, see Notified Body under the Machinery Regulation (EU) 2023/1230: When Is It Required?

Annex II: Software Becomes a Safety Component

Alongside familiar items such as protective devices, safety logic units, emergency stop devices, two-hand control devices, ROPS and FOPS, the indicative list now includes software ensuring safety functions, safety components with self-evolving behaviour using machine learning, and filtering systems integrated into machinery cabins to protect operators against hazardous substances, including plant protection products.

Annex III: New Essential Health and Safety Requirements

Collaborative robot and safety laser scanner – new essential requirements of Regulation 2023/1230
  • Risk assessment: hazards that may arise during the lifecycle from intended self-evolving behaviour or logic, and risks from different levels of autonomy, must be covered.
  • 1.1.6 Ergonomics: psychological stress is now addressed, and the human-machine interface of self-evolving or autonomous machinery must be adapted to operators and communicate planned actions.
  • 1.1.9 Protection against corruption: connected devices or remote access must not lead to hazardous situations; safety-critical hardware, software and data must be protected, and evidence of legitimate or illegitimate intervention collected.
  • 1.2.1 Safety and reliability of control systems: control systems must withstand reasonably foreseeable external influences, including malicious attempts. Records of interventions and safety software versions uploaded after placing on the market must be kept for 5 years; for self-evolving systems, data on safety-related decision-making must be kept for one year.
  • 1.3.7 Moving parts: contact risks and psychological stress from human-machine coexistence and interaction must be prevented.
  • Section 3 – Autonomous mobile machinery: new definitions of autonomous mobile machinery, supervisor and supervisory function. Where relevant, a supervisory function must allow remote stop, start and moving to a safe position, and the machine must not operate if that function is not active.

Other Changes for Manufacturers

Machinery manufacturer's engineer reviewing the technical file and conformity documents

Software, source code and substantial modification

A safety component explicitly includes physical or digital components, including software. On a reasoned request, the technical documentation must make the source code or programming logic of safety-related software available. For sensor-fed, remotely driven or autonomous machinery, the technical documentation must also describe the system, data, development, testing and validation processes. A physical or digital modification that creates a new hazard or increases an existing risk is a “substantial modification”, and whoever carries it out is treated as the manufacturer (Article 19).

Digital instructions and declarations

  • Instructions for use may be provided in digital format, printable and downloadable, and available online for the expected lifetime of the product and for at least 10 years.
  • If the user asks at the time of purchase, a paper copy must be provided free of charge within one month. Safety information for products that non-professional users can use must always be provided on paper.
  • Instructions and safety information must be in Turkish.
  • The EU declaration of conformity may be provided via a web address or machine-readable code given in the instructions. If drawn up in another language, a Turkish translation must be attached. Under Annex V, it may include a colour image of the product; numbering the declaration is optional.

Partly completed machinery

Manufacturers must prepare the technical documentation in Annex IV Part B, an EU declaration of incorporation under Annex V Part B, and assembly instructions under Annex XI (Articles 12 and 23).

Importers, distributors and authorised representatives

Under the Turkish text, the importer and the authorised representative are persons established in Türkiye. Importers must verify the conformity assessment, technical documentation, CE marking and accompanying documents, and indicate their own contact details on the product or packaging. Economic operators must be able to identify their suppliers and customers for 10 years (Article 20).

EU-Type Examination Certificates: Maximum 5 Years (Annex VII)

  • A new or renewed EU-type examination certificate is valid for no more than 5 years.
  • The manufacturer must inform the notified body of all modifications to the approved type that may affect conformity.
  • If the manufacturer applies for review between 12 and 6 months before expiry and nothing has changed in the type or the state of the art, the certificate can be renewed under a simplified procedure, without repeating examinations and tests.

Transition Rules

Provisional Article 1 provides that:

  • products placed on the market in conformity with the Turkish Machinery Safety Regulation (2006/42/EC) before 20 January 2027 may continue to be made available on the market; and
  • EC type-examination certificates and approval decisions issued under Article 13 of that Regulation remain valid until they expire.

Products placed on the Turkish market for the first time from 20 January 2027 need technical documentation, declarations, instructions and marking that meet the new Regulation.

Notified Bodies

The provisions on notified bodies (Articles 27–42) apply from the date of publication, so that Turkish bodies can complete accreditation and notification before 20 January 2027. Notified body status is obtained once the European Commission assigns an identification number and publishes it in NANDO (Article 36). Before choosing a body, check in NANDO that it is notified under Regulation (EU) 2023/1230 for your product category and module.

Work with TESTPLUS

TESTPLUS is Notified Body NB 2908, providing independent conformity assessment and certification for machinery (2006/42/EC), outdoor noise (2000/14/EC) and EMC (2014/30/EU) for manufacturers supplying the EU and Türkiye. TESTPLUS has started the transition process to be notified under the new Machinery Safety Regulation (2023/1230/EU); the accreditation transition audit is being scheduled by TÜRKAK, the Turkish Accreditation Agency. Contact us to discuss the conformity assessment of your product under the new rules.

Related reading

Source: Official Gazette of the Republic of Türkiye, 16 October 2026, issue no. 33402 – Machinery Safety Regulation (2023/1230/EU) and annexes, Ministry of Industry and Technology. This article is for information only; the legally binding text is the Regulation and its annexes as published in the Official Gazette.