Skip to main content

Certification fees at TESTPLUS are calculated from the assessment duration, the applicable legislation and the tests required for your product. This page explains the principles behind certification fees and durations.

Duration and Fee Principles

TESTPLUS determines certification durations and fees according to the scope of the application, on the basis of predefined principles applied equally to all applicants. This page summarises the components of the fee and how the duration is calculated; the exact amount is communicated in a written offer for each application.

How are certification fees made up?

Total service fee = Application fee + (Assessment duration [man-days] × daily assessment rate) + Certificate / usage fee ± optional additional items

  • Fees are set in euro (€) and exclude VAT.
  • For each application, the duration and fee are determined by the Technical Regulation Manager on the basis of the application information and communicated to the client in the Product Certification Offer-Agreement. No work is started before the offer is accepted.
  • Travel and accommodation expenses, where required, are invoiced separately at actual cost.
  • The issue of additional (duplicate) certificates and certificate amendments such as a change of address/company name or the addition of a registered trademark are charged separately.
  • Where an application covers more than one type, a volume discount on the daily assessment rate may be applied to the second and subsequent types. Offers below cost are not made.

How is the assessment duration determined?

The assessment duration is the sum of the preliminary technical file review carried out in the office and the on-site assessment. One man-day is an 8-hour working day. Estimated durations are given below; the lower values in the table are minimum durations, and no application is planned for less than these.

Programme Module Preliminary technical file review (office) On-site assessment Total estimated duration
Machinery Safety – 2006/42/EC Annex IX – EC Type-Examination (Annex IV machinery) 1–2.5 man-days 2–5 man-days 3–7.5 man-days
EMC – 2014/30/EU Annex III – EU Type-Examination (Module B) 0.5–2 man-days Not required 0.5–2 man-days
Noise – 2000/14/EC Annex VI 0.5–1 man-day 1–2 man-days 1.5–3 man-days
Noise – 2000/14/EC Annex VII – Unit Verification 0.5–1 man-day 1–2 man-days (including measurement) 1.5–3 man-days
Noise – 2000/14/EC Annex VIII – Full Quality Assurance 0.5–1 man-day (Stage 1) 1–2 man-days (Stage 2) 1.5–3 man-days (production site in Türkiye); 3–4.5 man-days (production site abroad) + annual surveillance

No separate on-site assessment is required for EMC; the assessment is carried out in the office on the basis of accredited laboratory test reports.

Factors affecting duration and fee

Factor Reduces duration / fee Increases duration / fee
Condition of the technical file Complete, well-organised file fully in line with harmonised standards File with deficiencies, with previous nonconformities not closed, or requiring translation
Complexity of the product Standard product Machinery involving more than one hazard group, integrated systems, custom-built products
Number of types Single type Three or more types, or a large number of model variants
Site No on-site assessment required, or a nearby site Site visit abroad
Additional services None Translation, additional site visit, coordination of sample testing

Audit duration for Annex VIII Full Quality Assurance

For quality assurance system audits under Annex VIII of 2000/14/EC, the duration is calculated according to the principles of ISO/IEC 17021-1:

  • The base audit duration is determined by the number of effective personnel involved in realising the product and by the risk category of the equipment. Equipment subject to noise limits is in the high-risk category; equipment subject only to marking of the guaranteed sound power level is in the medium-risk category.
  • Seasonal, part-time and subcontracted personnel working within the scope are included in the number of effective personnel.
  • The base duration may be reduced or increased according to the characteristics of the organisation; this adjustment may in no case exceed 30%.
  • An additional 0.5 man-day is added for each of the following: the production site is abroad; the audit is conducted through an interpreter; the number of product types in scope exceeds 50.
  • Approximately 1/3 of the initial certification audit duration is allocated to surveillance audits and 2/3 to recertification audits. The annual surveillance audit is at least 1 man-day, and at least 2 man-days for projects whose production site is abroad.
  • For projects whose production site is abroad, the initial certification audit duration may not be less than 3 man-days.
  • Travel time and breaks are not included in the audit duration.

Short-notice audits

Extraordinary (short-notice) audits requested by the competent authority or the accreditation body are charged at the daily assessment rate of the relevant certification programme; travel and accommodation expenses are invoiced separately.

Fee and duration principles are applied in line with ISO/IEC 17065 requirements for certification bodies.

To obtain an offer

To receive duration and fee information specific to your application, simply fill in the Product Certification Application Form; once your application has been evaluated, the offer is sent to you in writing.

This page is the public summary of TL08 Instruction for Determining Product Certification Durations and Fees Rev.7 (01.09.2026) and TL10 Instruction for Determining Audit Durations and Fees (ISO/IEC 17021-1) Rev.5 (01.09.2026). The current full text of the documents governs the activities and is provided to interested parties on request. The Turkish original prevails in case of any discrepancy.