Skip to main content

Short answer: A notified body is an independent conformity assessment body designated to assess products under EU harmonisation legislation and notified to the European Commission. It receives a four-digit identification number and is published in the NANDO database.

What Is a Notified Body?

For higher-risk products, EU legislation does not accept the manufacturer’s declaration alone. It requires an independent body to assess the design, type or production. Notified bodies authorised under the relevant legislation carry out this task.

What Does a Notified Body Do?

Its tasks depend on the conformity assessment procedure set by the legislation. The main ones are:

  • Examining the design or type sample and issuing a type-examination certificate.
  • Performing or supervising tests and inspections.
  • Verifying a single product (unit verification).
  • Assessing, approving and monitoring the manufacturer’s quality system.
  • Reviewing certificates it has issued and suspending or withdrawing them where necessary.

How Is a Notified Body Appointed?

  1. Accreditation: The candidate is usually accredited by a national accreditation body.
  2. Designation: The competent authority for the legislation assesses and designates the candidate.
  3. Notification: The notifying authority informs the European Commission through NANDO.
  4. Publication: The Commission assigns an identification number and the body appears in NANDO.

What Does the Notified Body Number Mean?

The four-digit number identifies the body. A body holds one number even when it is notified under several pieces of legislation. Where the body is involved in the production control phase, the number is added beside the CE marking (for example, CE 2908). The number alone does not prove authority: check the legislation, procedure and product scope.

Notified Body vs Accredited Body

Notified body Accredited body
Authority from Designated by a competent authority and notified to the European Commission National accreditation body
Field Mandatory conformity assessment Activities within the accreditation scope, including the voluntary field
How to verify NANDO Accreditation certificate and scope
Number Four-digit NB number Accreditation number

Not every accredited body is a notified body, and consultancies are not authorised to issue certificates. This matters when choosing between CE certification bodies.

When Do You Need a Notified Body?

For lower-risk products, the manufacturer can declare conformity through internal production control. Where legislation requires independent assessment, a notified body is mandatory. Examples include Annex IV machinery under Directive 2006/42/EC and Article 12 equipment under Directive 2000/14/EC. Under Directive 2014/30/EU, using a notified body is the manufacturer’s choice.

When Is a Notified Body Required? Machinery, Outdoor Noise and EMC

EU legislation When a notified body is required
Machinery Directive 2006/42/EC Annex IV machinery: EC type-examination (Annex IX) or full quality assurance (Annex X). If the Annex IV machine is built fully to harmonised standards, the manufacturer may also use internal checks (Annex VIII). Other machinery: internal checks, with voluntary third-party certification as an option.
Machinery Regulation (EU) 2023/1230 Applies from 20 January 2027. Annex I Part A machinery always needs a notified body. Annex I Part B machinery needs one when harmonised standards are not fully applied.
Outdoor Noise Directive 2000/14/EC Article 12 equipment (with permissible sound power limits): a notified body under Annex VI, VII or VIII. Article 13 equipment (noise marking only): internal control under Annex V, no notified body needed.
EMC Directive 2014/30/EU Not mandatory. The manufacturer may choose internal production control (Module A) or EU type-examination by a notified body (Module B, Annex III) followed by Module C.

Do US Manufacturers Need a Notified Body?

US manufacturers follow the same rules as manufacturers in the EU. If the EU legislation requires a notified body for the product, the certificate must be issued by a body listed in NANDO for that legislation and procedure. US marks and listings, such as those issued by a Nationally Recognized Testing Laboratory (NRTL) for the US market, do not replace the EU conformity assessment.

A notified body’s certificate is valid throughout the EU regardless of where the body is located. Notified bodies in Türkiye are notified under the EU–Türkiye Customs Union and appear in NANDO in the same way as bodies in the EU member states. Before signing a contract, check in NANDO that the body’s number covers the legislation, the procedure and your product category. For the full process, see how to get CE certification.

TESTPLUS (NB 2908) works with US manufacturers of machinery, outdoor equipment and electrical equipment through its USA contact office. See CE certification for US and UK manufacturers.

Where Can You Find the List of Notified Bodies?

The official list is in the European Commission’s NANDO database, which can be searched by country and by legislation.

TESTPLUS: Notified Body 2908

TESTPLUS is a notified body for machinery (2006/42/EC), noise (2000/14/EC) and EMC (2014/30/EU), and is one of seven bodies worldwide notified under all three. TESTPLUS does not provide consultancy; we carry out impartial conformity assessment only.

Request a quote or verify a certificate.

Notified Body: FAQ

What does NB mean?

NB is the common abbreviation for notified body.

How do I check whether a company is a notified body?

Ask for its four-digit number and search NANDO. Confirm that the listing covers the relevant legislation, procedure and product group.

Does a notified body prepare the technical file?

No. Preparing the technical file is the manufacturer’s responsibility. The notified body assesses the file and the product independently.

Official Sources