Short answer: Which body can issue your CE certificate depends on the legislation that applies to your product. If that legislation requires third-party assessment, only a notified body listed in NANDO for that legislation and product can issue the certificate. If it does not, the manufacturer draws up the EU Declaration of Conformity under its own responsibility. A voluntary certificate does not replace that declaration.
Who Issues a CE Certificate?
A “CE certificate” is not a single document. The term usually covers the EU Declaration of Conformity signed by the manufacturer and, where required, a certificate issued by a notified body. So the first question for any manufacturer searching for a CE certification body is this: Is an independent body mandatory for my product?
Types of CE Certification Companies
The companies you find online do not all hold the same authority. The main differences are:
| Type of company | What it does | How to check its authority |
|---|---|---|
| Notified body | Performs the conformity assessment required by the legislation and issues certificates. Holds a four-digit identification number. | NANDO |
| Accredited certification body | Certifies products within its accreditation scope in the voluntary field (ISO/IEC 17065). This is not a notified body certificate. | Accreditation certificate and scope |
| Test laboratory | Performs tests and issues reports. A test report alone is not a CE certificate. | Accreditation certificate and scope (ISO/IEC 17025) |
| Consultancy | May support preparation, but is not authorised to issue certificates. | – |
Do You Need a Notified Body?
The applicable legislation decides this. Under the three pieces of legislation for which TESTPLUS is notified, the position is:
- Machinery (2006/42/EC): Annex IV machinery requires a notified body for EC type-examination or full quality assurance. Other machinery follows internal production control. More: machinery CE certification.
- Noise (2000/14/EC): Article 12 equipment, which is subject to noise limits, requires a notified body. Article 13 equipment follows internal production control. More: noise emission.
- EMC (2014/30/EU): The manufacturer may choose internal production control (Module A) or EU type-examination (Modules B + C). More: electromagnetic compatibility.
Where a notified body is mandatory, a certificate from any other company does not meet the manufacturer’s legal obligation.
What Does the New Machinery Regulation (EU) 2023/1230 Change?
The Machinery Regulation (EU) 2023/1230 replaces Directive 2006/42/EC and applies in the EU from 20 January 2027. Whether a notified body is needed depends on the machinery category:
- Annex I Part A: A notified body is always required (Modules B + C, Module H or Module G).
- Annex I Part B: If the machinery meets all relevant requirements through harmonised standards or common specifications, the manufacturer may use Module A. If not, a notified body is required.
- Machinery outside Annex I: Internal production control (Module A) applies.
When choosing a body for machinery, check its authority under Regulation (EU) 2023/1230 in NANDO as well as under Directive 2006/42/EC.
How to Verify a Certification Body in 4 Steps
- Ask for its number. Notified bodies hold a four-digit identification number (for example, NB 2908).
- Search NANDO. Look up the number or name in the NANDO database. Check the legislation, procedure and product scope, not only whether the body is listed.
- Review the accreditation scope. Confirm that the accreditation certificate and its scope cover your product.
- Verify the certificate. Compare the body’s name, number, legislation and product details. You can check TESTPLUS certificates on our certificate verification page.
What to Look For When Choosing
- Scope: Make sure the body is authorised for your product and the applicable procedure.
- Type of certificate: The quotation should state clearly whether it covers a type-examination certificate or a voluntary certificate.
- Impartiality: A certification body should not provide consultancy for the products it certifies.
- Number beside the CE marking: The notified body number is added only when that body is involved in the production control phase. It is not added for voluntary certification.
- CE marking on certificates: The European Commission does not consider it acceptable for certificates to bear a CE marking.
- Cost: Fees vary with the procedure, number of models and test scope. More: CE marking cost.
What TESTPLUS Certifies
TESTPLUS is a notified body (NB 2908) under Directives 2006/42/EC, 2000/14/EC and 2014/30/EU, and is one of seven bodies worldwide notified under all three. We are accredited to ISO/IEC 17065.
Alongside mandatory conformity assessment, we also certify in the voluntary field, such as machinery safety certification for generators and compressors outside Annex IV. TESTPLUS does not provide consultancy; we carry out impartial conformity assessment only.
Request a quote or go to the application form.
CE Certification Bodies: FAQ
Where can I find a list of CE certification bodies?
The official list of notified bodies is in the European Commission’s NANDO database. You can search it by country and by legislation.
Is every company offering CE certificates authorised?
No. In the mandatory field, authority is checked in NANDO by legislation and product. Accreditation is also limited to its scope and does not extend to other products.
Can a consultancy issue a CE certificate?
No. Consultancies are not authorised to issue certificates. In the mandatory field, only a notified body listed in NANDO for that legislation and product can do so. If a company offers you a certificate, ask which body issues it and check that body’s authority.