Summary: CE marking requirements come from the EU legislation that applies to your product. For US manufacturers, the core requirements are the same for every sector: identify the legislation, meet the essential requirements, complete the right conformity assessment procedure (with a notified body where required), keep a technical file, sign the EU Declaration of Conformity, affix the CE marking correctly and have an economic operator established in the EU. The checklist below walks through each requirement for machinery, outdoor equipment and electrical equipment.
Many US manufacturers first meet CE marking requirements when an EU distributor asks for a “CE certificate”. In practice, CE marking is not a single document. It is the result of a set of legal obligations that the manufacturer must fulfil before placing the product on the EU market.
What Are the CE Marking Requirements?
CE marking requirements are set by EU harmonisation legislation, such as the Machinery Directive 2006/42/EC, the Outdoor Noise Directive 2000/14/EC and the EMC Directive 2014/30/EU. Each act defines the essential requirements a product must meet and the conformity assessment procedures that prove it. Common rules for all acts are set by the New Legislative Framework (Regulation (EC) No 765/2008 and Decision No 768/2008/EC), and market surveillance by Regulation (EU) 2019/1020.
The manufacturer is responsible for meeting these requirements, wherever the manufacturer is located. A US company that places products on the EU market under its own name has the same obligations as an EU manufacturer.
CE Marking Requirements Checklist
- Identify all applicable EU legislation. A machine is often covered by more than one act: the Machinery Directive (replaced by the Machinery Regulation (EU) 2023/1230 from 20 January 2027), the EMC Directive and, for equipment used outdoors, the Outdoor Noise Directive. Other acts, such as RoHS or the Radio Equipment Directive, may also apply.
- Identify the essential requirements. For machinery these are the essential health and safety requirements in Annex I. For EMC they are the protection requirements in Annex I of Directive 2014/30/EU. For outdoor equipment they include noise marking and, for Article 12 equipment, permissible sound power limits.
- Select the harmonised standards. Applying harmonised standards published in the Official Journal gives a presumption of conformity with the requirements they cover. Use the Harmonised Standards Finder to check the standards for your product.
- Determine the conformity assessment procedure. Check whether the legislation requires a notified body for your product, for example Annex IV machinery or Article 12 outdoor equipment, or whether internal production control is allowed.
- Carry out the risk assessment and tests. Typical evidence includes a risk assessment to EN ISO 12100, electrical equipment checks to EN 60204-1, EMC test reports and sound power measurements to EN ISO 3744. See CE certification and CE testing.
- Compile the technical documentation. The technical file shows how the product meets the essential requirements: drawings, risk assessment, test reports, list of standards, instructions and the declaration. It is generally kept for 10 years and must be available to market surveillance authorities on request.
- Draw up and sign the EU Declaration of Conformity. The declaration lists every applicable act, the standards applied and, where involved, the notified body’s name, number and certificate.
- Affix the CE marking correctly. The marking must be visible, legible and indelible, at least 5 mm high and in the prescribed proportions. Where a notified body is involved in the production control phase, its number follows the marking. Outdoor equipment also carries the guaranteed sound power level label. See CE marking rules and dimensions.
- Prepare the instructions and product markings. Instructions must be supplied in the language of the member state where the product is sold. The product must show the manufacturer’s name and address and the type, batch or serial number.
- Appoint an economic operator in the EU. Under Article 4 of Regulation (EU) 2019/1020, most CE-marked products need an importer, authorised representative or fulfilment service provider established in the EU. See EU authorised representative and market surveillance.
CE Marking Requirements by Product Type
| Product | Main legislation | Key requirements | Notified body |
|---|---|---|---|
| Machinery | Machinery Directive 2006/42/EC (Regulation (EU) 2023/1230 from 20 January 2027) | Annex I safety requirements, risk assessment, instructions, EC Declaration of Conformity | Required for Annex IV machinery unless built fully to harmonised standards; voluntary otherwise |
| Outdoor equipment | Outdoor Noise Directive 2000/14/EC | Sound power measurement, guaranteed sound power level label | Required for Article 12 equipment (Annex VI, VII or VIII); not required for Article 13 equipment |
| Electrical and electronic equipment | EMC Directive 2014/30/EU | Emission and immunity requirements, EMC assessment | Optional (EU type-examination, Annex III) |
Common Mistakes by US Manufacturers
- Treating a US listing or NRTL mark as evidence of CE conformity. US marks do not replace the EU conformity assessment.
- Affixing the CE marking without a technical file or a signed Declaration of Conformity.
- Accepting a “certificate of compliance” from a body that is not notified for the legislation where a notified body is mandatory. Always check the body’s number in NANDO.
- Forgetting the guaranteed sound power level label on generators, compressors, lawn mowers and other outdoor equipment.
- Listing the wrong or outdated acts in the declaration, for example missing the EMC Directive for a machine with electronic controls.
- Placing products on the EU market without an economic operator established in the EU.
Frequently Asked Questions
Is CE marking required in the United States?
No. CE marking is required for products placed on the market in the European Economic Area (and in Türkiye, which applies the same legislation). It has no legal status for sales within the United States.
Do I need a CE certificate to affix the CE marking?
Not always. A certificate from a notified body is required only where the legislation requires notified body involvement. For other products, the manufacturer affixes the CE marking after internal production control, and may choose voluntary third-party certification to give distributors independent evidence.
Who affixes the CE marking?
The manufacturer, or its authorised representative where the legislation allows, affixes the CE marking after completing the conformity assessment and signing the declaration.
How long must the technical file be kept?
The technical documentation is generally kept for 10 years after the product is placed on the market or, for machinery, after the last unit is manufactured.
For the full process from start to finish, see how to get CE certification.
How TESTPLUS Can Help
TESTPLUS is EU Notified Body NB 2908 for the Machinery Directive 2006/42/EC, the Outdoor Noise Directive 2000/14/EC and the EMC Directive 2014/30/EU, and one of seven bodies worldwide notified under all three. Where a notified body is not mandatory, TESTPLUS provides voluntary third-party certification as an independent body. TESTPLUS carries out conformity assessment only; it does not prepare technical files for manufacturers. US manufacturers can reach us through our USA contact office. See CE certification or contact us.
Sources
- Regulation (EU) 2019/1020 on market surveillance – EUR-Lex
- Machinery Directive 2006/42/EC – EUR-Lex
- Outdoor Noise Directive 2000/14/EC – EUR-Lex
- EMC Directive 2014/30/EU – EUR-Lex
- The ‘Blue Guide’ on the implementation of EU product rules 2022 (OJ C 247, 29.6.2022)