Skip to main content

Self-declaration vs CE certificate is one of the first decisions a manufacturer faces before placing a product on the EU market. Should you assess conformity yourself and sign the EU declaration of conformity on your own, or should an independent third-party body examine the product and issue a certificate? Both routes can lead to lawful CE marking. They differ in cost, liability, buyer trust and the level of risk you carry. This article compares the two routes so you can choose with confidence.

As Notified Body NB 2908, TESTPLUS provides machinery CE certification under the Machinery Directive 2006/42/EC and the Machinery Regulation (EU) 2023/1230.

What Is Self-Declaration?

Manufacturer signing the EU declaration of conformity

Under self-declaration, the manufacturer carries out the conformity assessment alone. In the EU’s New Legislative Framework this is usually Module A – internal production control. The manufacturer:

  • identifies the applicable directives and regulations and the relevant harmonised standards;
  • performs the risk assessment and arranges the necessary tests;
  • compiles the technical documentation;
  • signs the EU declaration of conformity and affixes the CE marking.

No external body reviews the product. The manufacturer alone carries full responsibility if a market surveillance authority later finds a non-conformity.

What Is a Third-Party CE Certificate?

A third-party certificate is issued by an independent body after it has examined the product and its documentation. There are two situations:

  • Mandatory: the legislation requires a notified body. Examples are Annex IV machinery under the Machinery Directive 2006/42/EC when harmonised standards are not fully applied, equipment covered by Annex VI, VII or VIII procedures of the Outdoor Noise Directive 2000/14/EC, and Annex I Part A machinery under the Machinery Regulation (EU) 2023/1230.
  • Voluntary: self-declaration is allowed, but the manufacturer chooses independent certification to strengthen its evidence and its position with customers.

Self-Declaration vs CE Certificate: Side-by-Side Comparison

Criterion Self-declaration Third-party CE certificate
Who assesses the product Manufacturer Independent certification body or notified body
Direct cost Lower (tests and internal time) Higher (assessment and certification fees)
Time to market Fast if expertise is available in-house Depends on the review and test schedule
Risk of missed requirements Higher, no external review Lower, independent expert review
Buyer and distributor trust Limited, based on the manufacturer’s word High, verifiable certificate
Position during market surveillance Manufacturer defends its own assessment Independent evidence supports the declaration
Allowed for Annex IV / Part A machinery Only in limited cases Always

Advantages and Disadvantages of Self-Declaration

Advantages

  • Lower direct cost and full control of the schedule
  • Suitable for low-risk products with clear harmonised standards
  • No dependence on an external body’s availability

Disadvantages

  • Requires in-depth knowledge of the legislation, standards and test methods
  • Errors are often found only after the product is on the market, when recalls and penalties are expensive
  • Many importers, large retailers and public buyers ask for an independent certificate anyway

Benefits of a Third-Party CE Certificate

Independent product test by a notified body expert
  • Independent verification: an impartial body confirms that the product meets the essential requirements.
  • Market acceptance: distributors, tender authorities and insurers recognise accredited certificates.
  • Reduced liability risk: independent evidence strengthens your technical file if your product is questioned.
  • Early detection of gaps: problems are found before series production and export.
  • Accreditation: a certificate issued under ISO/IEC 17065 accreditation can be verified by your customers.

How to Choose the Right Route

  1. Check whether the legislation makes a notified body mandatory for your product.
  2. If it does not, assess your in-house expertise and the product’s risk level.
  3. Consider what your customers and target markets expect.
  4. Compare the cost of certification with the cost of a recall or market withdrawal.

The European Commission’s New Legislative Framework pages and the Blue Guide explain the conformity assessment modules in detail.

Frequently Asked Questions

Is self-declaration legal for CE marking?

Yes, when the applicable legislation allows internal production control for your product. For products that require a notified body, self-declaration alone is not enough.

Does a voluntary certificate change the CE marking?

No. The CE marking is affixed in the same way. The certificate is additional, independent evidence that supports your EU declaration of conformity.

Can I switch from self-declaration to third-party certification later?

Yes. Many manufacturers start with self-declaration and seek independent certification when they enter new markets or larger customers ask for it.

Independent Certification with TESTPLUS

TESTPLUS is EU Notified Body NB 2908, accredited by TÜRKAK under ISO/IEC 17065, with 19 years of experience. It carries out mandatory conformity assessment under the Outdoor Noise Directive 2000/14/EC, the Machinery Directive 2006/42/EC and the EMC Directive 2014/30/EU, and offers voluntary third-party certification for products where self-declaration is allowed. Apply with the product certification application form or contact us for a quotation.

Related reading