Commission Implementing Decision (EU) 2026/2015 updated the list of harmonised standards for machinery on 7 September 2026. It adds 67 references under the Machinery Directive 2006/42/EC, corrects two others and repeals the underlying list, Implementing Decision (EU) 2023/1586, with effect from 20 January 2027.
That last point matters most. On the same date the Machinery Regulation (EU) 2023/1230 replaces the Directive, and manufacturers will need standards cited under the Regulation to rely on a presumption of conformity. This article explains what changed, what is expected next and what to check in a technical file.
What Decision (EU) 2026/2015 Does
| Article | Effect |
|---|---|
| Article 1 | Amends Annex I to Implementing Decision (EU) 2023/1586, the list supporting Directive 2006/42/EC |
| Article 2 | Repeals Implementing Decision (EU) 2023/1586 with effect from 20 January 2027 |
| Article 3 | Entry into force on the day of publication in the Official Journal: 7 September 2026 |
The Decision was adopted on 4 September 2026. It adds and corrects references and does not list references for withdrawal. Earlier in 2026, Implementing Decision (EU) 2026/546 also amended the same list.
Which Standards Were Added
The annex inserts 4 references in Part Two (general standards), inserts 63 in Part Three (product standards) and replaces 2 existing rows.
| Area | Examples of cited references |
|---|---|
| Sound power measurement | EN ISO 3744:2026 |
| Positioning of safeguards | EN ISO 13855:2024 |
| Guard interlocking | EN ISO 14119:2025 with EN ISO 14119/A11:2026 |
| Functional safety of control systems | EN IEC 62061:2021 with A1:2024 |
| Industrial robots | EN ISO 10218-1:2025, EN ISO 10218-2:2025 |
| Press brakes | EN ISO 6909:2026 |
| Stationary grinding machines | EN ISO 16089:2025 |
| Industrial trucks, electrical requirements | EN 1175:2025 |
| Electric and hydraulic service lifts | EN 81-30:2025 |
| Partially automated and autonomous agricultural machinery | EN ISO 18497-1 to -4:2024 |
| Corrected references | EN 13155:2020+A1:2025/AC:2026, EN 14439:2025/AC:2026 |
The table shows examples only. Always check the exact edition against the Decision. The recitals note that EN 50434:2014 and EN 62841-2-11:2016 with its A1:2020 are affected by a restriction, so the wording of the list should be read carefully for those standards.

Does EN ISO 3744:2026 Change Noise Testing Under 2000/14/EC?
Not through this Decision. It concerns harmonised standards under the Machinery Directive only. The noise measurement methods for outdoor equipment are set in Annex III to Directive 2000/14/EC, as amended by Delegated Regulation (EU) 2024/1208, which uses EN ISO 3744:2010 as its basic standard. See our EN ISO 3744 measurement guide and our overview of Directive 2000/14/EC.
What Happens on 20 January 2027
| Period | Legal basis | Standards list |
|---|---|---|
| Up to and including 19 January 2027 | Directive 2006/42/EC | Decision (EU) 2023/1586, as amended |
| From 20 January 2027 | Regulation (EU) 2023/1230 | References cited in the Official Journal under the Regulation |
When Decision 2026/2015 was adopted, no references had been published under the Regulation. As of 4 November 2026, we have not seen a first decision published either. Please check the Official Journal for the latest position.
What Is Expected Next
The Commission’s position, presented to the Expert Group on Machinery on 22 October 2026, is that almost all current harmonised standards under the Directive will be re-cited under the Regulation, provided they are still considered suitable. Around 800 standards are cited under the Directive.
- Gap analysis: described by the Commission as almost finalised but still ongoing. It looks at new or significantly updated essential health and safety requirements.
- Restrictions: a re-cited standard may carry a restriction where it does not cover such a requirement. Presumption of conformity would then be limited, and the manufacturer would have to address the gap in another way.
- First implementing decision: reported as expected before the end of 2026.
- New standards: the standardisation request dates from 20 January 2025, and its first deadline of 20 January 2026 was not met for all activities. Standards on cyber-safety and AI were reported as not yet delivered.
- New Annex Z template: CEN and CENELEC approved a template that lists all essential requirements of the Regulation. Projects not yet dispatched for enquiry on 22 June 2026 must use it.

What to Check in Your Technical File
- List the harmonised standards you rely on, with the exact edition and date.
- Compare them with the current list. Our Harmonised Standards Finder is a starting point, and the Official Journal remains the reference.
- Use the machine’s actual placing-on-the-market date to decide which legal basis applies.
- Do not assume that a standard covers new requirements of the Regulation, such as protection against corruption. Check them separately, and watch for restrictions once the first list appears.
- Update the EU declaration of conformity for machinery placed on the market from 20 January 2027 so that it refers to the Regulation.
For how the Commission is treating several of these requirements, see our article on the draft chapters of the Machinery Regulation guide.
Frequently Asked Questions
Are standards cited under the Machinery Directive automatically valid under the Regulation?
No. A presumption of conformity under the Regulation depends on the reference being published under the Regulation. Re-citation of most standards is planned, but it requires a new decision and may include restrictions.
Does Decision (EU) 2026/2015 remove any standard?
It adds 67 references and replaces 2 rows. It does not list references for withdrawal. The whole list falls away on 20 January 2027, when Decision (EU) 2023/1586 is repealed.
From when can the newly cited standards be used?
The recitals link presumption of conformity to the date a reference is published in the Official Journal. For these references, that is 7 September 2026, under Directive 2006/42/EC.
How TESTPLUS Can Help
TESTPLUS is EU Notified Body NB 2908 and one of only seven bodies worldwide notified for machinery, outdoor noise and EMC together. We carry out conformity assessment and do not provide consultancy. For the certification process, see our machinery CE certification page, or read our transition notice for certificate holders. You can also contact our team.
Our accreditation process with TÜRKAK and our designation process with the Ministry of Industry and Technology for the new Machinery Regulation (EU) 2023/1230 are ongoing.
Sources
- Commission Implementing Decision (EU) 2026/2015 – EUR-Lex
- Commission Implementing Decision (EU) 2023/1586 – EUR-Lex
- Regulation (EU) 2023/1230 – EUR-Lex
- Commission presentation to the Expert Group, 22 October 2026 – IBF Solutions copy
- New Machinery Regulation: status of harmonised standards – IBF Solutions
- Machinery webinar, 14 September 2026 – CEN and CENELEC