Skip to main content

Certification Rules and Client Obligations

This page summarises the rules and mutual obligations that apply to applicants and certificate holders in the product certification activities carried out by TESTPLUS as a notified body (No. 2908). The rules are common to all certifications in the fields of machinery safety, outdoor noise emission and electromagnetic compatibility; additional directive-specific requirements are given separately at the end of the page.

Scope

The rules apply to conformity assessment activities carried out under the following legislation:

Legislation Conformity assessment procedure
Machinery Directive 2006/42/EC Annex IX – EC Type-Examination
Directive 2000/14/EC on noise emission in the environment by equipment for use outdoors Annex VI, Annex VII (Unit Verification) and Annex VIII (Full Quality Assurance)
Electromagnetic Compatibility Directive 2014/30/EU Annex III – EU Type-Examination

General conditions

  • The services cover evaluation of the application, document review, on-site audit, reporting and certification.
  • The client is solely responsible for the product being designed, manufactured and placed on the market in accordance with the applicable directives and national legislation.
  • TESTPLUS and its auditors may not provide consultancy to the client; the client shall not make any such request.
  • The conclusions of the audit team are recommendations. The final certification decision is made by an authorised person or committee independent of the audit process.
  • TESTPLUS may use external resources to carry out audit and testing activities; in that case the client is informed and responsibility remains with TESTPLUS.

Obligations of TESTPLUS

Impartiality

TESTPLUS carries out its activities in accordance with the principles of impartiality, independence, equal treatment, integrity, transparency and confidentiality. Auditors may not have any relationship or conflict of interest with the client and are kept free from all pressures, including commercial ones. Personnel who have provided consultancy to a client or have been employed by a client are not assigned to that client’s certification activities until 2 (two) years have passed since the end of that relationship.

Confidentiality

Written and verbal information obtained from the client and interested parties is kept confidential. Information is shared only with TÜRKAK and the competent Ministry at their request, and with other third parties only by court order; in that case the client is informed. Certification records are kept for at least 15 (fifteen) years.

Notifications and publicly available information

  • Significant changes to the certification system are announced to clients together with the transition period set.
  • Certified clients and clients whose certificates are suspended or withdrawn are published on the website; certification information is recorded in the ONTEK system. The information published is the organisation’s name, city/country, scope of the certificate, certificate status and the standard/directive on which it is based. The client may request a restriction of this information, provided a reasoned and signed written request is submitted before the certificate is published.
  • New certificates and decisions on suspension, reduction of scope and withdrawal are entered in the NANDO database; decisions on suspension, reduction of scope and withdrawal are also notified to the Competent Authority and to TÜRKAK within 5 (five) working days at the latest.
  • If TESTPLUS ceases its notified body activities, arrangements are made for client files to be transferred to a notified body designated by the client.

TESTPLUS holds professional liability insurance. TESTPLUS is not liable if the certificates it issues are not recognised by third parties.

Rights and obligations of the client

  • To have drawn up the technical file required by the applicable legislation and to deliver the documents requested for the application to TESTPLUS before the audits.
  • To give auditors access to premises, records and relevant departments; to provide information and documents accurately, completely and on time; to have the necessary samples ready; to ensure the protection of auditors and provide the necessary personal protective equipment.
  • To carry out the requested corrective actions within the specified period.
  • To keep records of complaints about the certified product and of the measures taken, and to submit them to TESTPLUS and the competent authorities on request.
  • To use the certificate only for the scope and address stated on it; not to reproduce it incompletely or misleadingly, not to falsify it, and not to translate it into another language without the written permission of TESTPLUS.
  • To follow and comply with the current rules published on the website and the applicable directives and standards.
  • To be personally liable to its customers and third parties for damage arising from nonconformity of the certified product; in the event of a nonconformity affecting the safety of life or property, to recall the products from the market and warn users.

Granting and maintaining certification, and surveillance

  1. Application and evaluation: The application is evaluated; if it is refused, the reason is notified in writing, and if it is accepted, an offer/agreement is prepared.
  2. Technical file review and audit: Deficiencies identified are notified to the client in a nonconformity report. Corrective actions are expected to be completed within 90 days. An additional period of up to 60 working days may be granted for minor nonconformities that could not be closed at the follow-up examination. If the nonconformities are not closed within the periods granted, the application is refused and this is notified to the other notified bodies and the Member States.
  3. Certificate: Issued as one original in Turkish and one in English and published on the website where it can be verified. The period of validity is determined by the legislation and the module.

In the case of complaints supported by objective evidence, TESTPLUS may carry out a short-notice audit with no more than 1 day’s notice. If the client refuses the audit, the certificate is suspended.

Notification of changes

Changes affecting certification are notified to TESTPLUS in writing. Changes to the application information, address, company name, legal status and organisational structure, and the transfer of the production site, must be notified within 30 (thirty) days at the latest. The product-related changes that must be notified are:

  • Changes affecting the structural design and requiring the design calculation to be updated; changes altering the operating principle,
  • Safety devices, enclosures and guards; electrical, hydraulic and pneumatic circuits; critical components,
  • Marking, labelling and signs; the addition of a model, or changes to a model name or registered trademark.

An additional examination or audit may be carried out, for a fee, to assess the effect of the change; the addition of a new brand or a new model requires a new type-examination. When the standard on which certification is based changes, the transition period is eighteen (18) months from the date the standard enters into force unless a statutory period applies; certificates not transitioned in time are withdrawn.

Suspension, reduction of scope, withdrawal

Suspension is an interim measure applied before withdrawal and may not exceed 6 months. The main reasons for suspension are: incorrect or misleading use of the certificate, the logo or the certification status; failure to close nonconformities; refusal or negative outcome of a short-notice audit; adverse information from market surveillance; breach of the agreement; failure to meet financial obligations; and the client’s own request. The suspension decision is notified in writing, with reasons, within 5 working days. If the reason for suspension is not resolved within 6 (six) months, the certificate is withdrawn.

If some models or variants covered by the certificate do not meet the requirements, the scope is reduced and the existing certificate is recalled; if the certificate is not returned within 15 days, the entire scope is suspended.

The certificate may be withdrawn directly in cases such as false declarations, modification of the product without written approval, falsification of the certificate, failure to notify a change of production site within 30 (thirty) days, or complete loss of conformity.

What the client must do

  • During suspension the rights arising from the certificate may not be exercised; use of the certificate and of all documents and promotional materials referring to it must cease.
  • On notification of the withdrawal decision, use of the TESTPLUS and TÜRKAK logos, the CE marking and any other statements indicating certification must cease immediately; the original certificate is returned to TESTPLUS.
  • Suspension or withdrawal does not remove legal and financial liabilities relating to products already placed on the market, or financial obligations towards TESTPLUS.
  • A client wishing to be certified again after withdrawal must go through the entire certification process from the beginning.

Use of certificates and marks

The certificate may be used only for the scope of certification and the certified production site and address, and in a way that does not create a false impression about the certification status. The TESTPLUS mark may not be placed on the product or used in a way that gives the impression that TESTPLUS takes responsibility for the product. For the detailed rules, see the Use of Certificates and Marks page.

Fees and payment

Fees are stated in the agreement and paid according to its payment terms; bank transfer charges and similar deductions are borne by the client. The travel and accommodation expenses of the audit team and the fees for special or follow-up audits are covered separately. If the client requests cancellation, the services performed up to that point are payable. For the principles, see the Duration and Fee Principles page.

Complaints and appeals

The client may appeal within one month against a decision taken by TESTPLUS concerning it. A client who does not accept the outcome of the appeal, or whose appeal is not concluded in time, may apply to the Turkish Accreditation Agency or the relevant Ministry. Details are on the Complaints and Appeals page.

Transfer of certification

An application to transfer to TESTPLUS a valid certificate issued by another notified body is made using form FR14. The applicant provides the existing certificate, the body that issued it, the date of certification, information on surveillance audits and the results of previous audits. Suspended or withdrawn certificates cannot be transferred. The transfer application is examined on the basis of the technical file and the previous assessment records; TESTPLUS carries out any examination, test or audit it considers necessary and makes the certification decision on the basis of its own assessment.

Amendment and termination of the agreement

When the terms of the agreement change, a new agreement is signed. Either party may terminate the agreement by giving at least 1 month’s written notice. TESTPLUS reserves the right to cancel the agreement if the information given in the application is misleading or incorrect, or if the logos are misused.

Additional directive-specific requirements

Machinery (2006/42/EC)

EC Type-Examination is carried out on a sample representative of the product; the certificate is valid for 5 (five) years. Changes to drive, braking and synchronisation mechanisms and to safety circuits (affecting the EN ISO 13849-1 performance level) require reassessment.

Noise (2000/14/EC)

The applicant must have drawn up the technical documentation specified in Annex V of the Directive. Compliance of the guaranteed sound power level with the limit values, and the marking requirements, are verified. The Annex VIII Full Quality Assurance certificate is valid for 3 (three) years; the Annex VII Unit Verification certificate is specific to the unit concerned and has no time limit. Revisions relating to sound insulation must be notified.

EMC (2014/30/EU)

The type-examination covers conformity of the type with the technical file and verification against the relevant harmonised standard. Sample tests are carried out in laboratories accredited to EN ISO/IEC 17025. The EU Type-Examination Certificate is valid for 5 (five) years.

This page is the public summary of R01 Product Certification Rules and General Conditions Rev.4 (01.09.2026). The current full text of the document governs certification activities and is provided to interested parties on request. The Turkish original prevails in case of any discrepancy.