From 20 January 2027, the Machinery Regulation (EU) 2023/1230 replaces the Machinery Directive 2006/42/EC. One of the first questions manufacturers ask is simple: will my machine need a notified body under the Machinery Regulation 2023/1230? This article explains when a notified body is mandatory, which conformity assessment modules apply, and what happens to EC type-examination certificates issued under the Directive.
Update: Türkiye published its Machinery Safety Regulation (2023/1230/EU), aligned with the EU Machinery Regulation, in the Official Gazette on 16 October 2026. Read more: Türkiye Publishes Its New Machinery Safety Regulation Aligned with (EU) 2023/1230
What Is a Notified Body under the Machinery Regulation?
A notified body is a conformity assessment body designated by a Member State and notified to the European Commission for specific tasks under the Regulation. Notified bodies are listed in the Commission’s NANDO database together with the legislation, products and procedures they are notified for. The provisions of the Regulation on the notification of conformity assessment bodies (Articles 26 to 42) have applied since 20 January 2024, so that bodies can be notified before the Regulation itself applies.
Before you choose a notified body, check in NANDO that it is notified under Regulation (EU) 2023/1230 for the category of machinery and the module you need.
The full legal text is available on EUR-Lex: Regulation (EU) 2023/1230, and notified bodies can be searched in the European Commission’s NANDO database.
When Is a Notified Body Mandatory?

Annex IV of the Directive is replaced by Annex I of the Regulation, which lists high-risk machinery in two parts. Article 25 sets the conformity assessment procedures:
- Annex I, Part A: third-party assessment is always required. The manufacturer chooses EU-type examination (Module B) followed by conformity to type based on internal production control (Module C), full quality assurance (Module H) or unit verification (Module G). Part A includes, for example, removable mechanical transmission devices and their guards, vehicle servicing lifts, portable cartridge-operated fixing and other impact machinery, and safety components or machinery with self-evolving behaviour based on machine learning that ensure safety functions.
- Annex I, Part B: internal production control (Module A) is allowed only where the machinery is designed and built in accordance with harmonised standards or common specifications covering all relevant essential health and safety requirements. Otherwise, Module B + C, Module H or Module G must be used, all of which involve a notified body.
- Machinery not listed in Annex I: internal production control (Module A) applies, and the manufacturer draws up the technical documentation and the EU declaration of conformity under its own responsibility.
Conformity Assessment Modules at a Glance
| Module | Procedure | Notified body role |
|---|---|---|
| A | Internal production control | None |
| B + C | EU-type examination + conformity to type | Examines the type and issues the EU-type examination certificate |
| H | Full quality assurance | Approves and monitors the quality system |
| G | Unit verification | Examines each individual machine |
What Happens to EC Type-Examination Certificates Issued under 2006/42/EC?

Under Article 52 of the Regulation, EC type-examination certificates and approvals issued under Article 12 of Directive 2006/42/EC remain valid until their expiry, and machinery placed on the market in accordance with the Directive before 20 January 2027 may continue to be made available. However, machinery placed on the market from 20 January 2027 must meet the essential health and safety requirements of the Regulation, including the new requirements on cybersecurity, software and self-evolving behaviour. Manufacturers should therefore review existing certificates against the new requirements with their notified body well before that date.
Practical Checklist for Manufacturers
- Check whether your machine is listed in Annex I, Part A or Part B, of Regulation (EU) 2023/1230.
- For Part B machinery, check whether the harmonised standards you apply cover all relevant essential requirements.
- Choose the module (A, B + C, H or G) and confirm in NANDO that your notified body is notified for it.
- Update the risk assessment, technical documentation and instructions to the Regulation’s requirements.
- Review EC type-examination certificates issued under 2006/42/EC before 20 January 2027.
For a broader overview of the changes, see our article on the New EU Machinery Regulation (EU) 2023/1230.
Machinery Certification with TESTPLUS
TESTPLUS is Notified Body No. 2908, accredited by TÜRKAK (AB-0155-U). Under the Machinery Directive 2006/42/EC we carry out EC type-examination for Annex IV machinery, and we provide voluntary third-party certification for machinery outside Annex IV. Learn more about machinery CE certification or contact us for your application.